Html Drop Down Menus by Vista-Buttons.com v5.0.0

4 HOLE MOUNTING PATTERN

MM-020X


	Html Drop Down Menus by Vista-Buttons.com v5.0.0	View/Print PDF

MM-020X with 1/2" NPT Pipe

MultiMount-020X Assembly

OPTIONAL ACCESSORIES:

• 3⁄4-10 All-thread adapter- Part #: 2-0350
• Ceiling plate- Part #: 2-0390
• 3⁄4-10 threaded rods (specify length)
• Safety cables (see separate data sheet

MultiMount™

Pan and Tilt Speaker Mount

The MM-020X is specially designed to suspend loudspeakers (weighing up to 60 lb./27 Kg) from overhead structures using standard off-the-shelf schedule 40, 1⁄2” NPT pipe. This allows the installer to bring the loudspeaker down from any height, positioning the speaker closer to the audience, often reducing the speaker’s size and power rating needs.

MM-020X provides a very clean loudspeaker installation because signal wire and safety cables can be passed through the pipe from the ceiling to the speaker’s terminal block without being seen. Also, this design adapts directly to standard loudspeaker mounting hole patterns so no modifications in the field will be necessary. mm-020x with 34-10 threated rod

In addition to the standard pipe, the MM-020X can also be suspended by a 3⁄4-10 threaded rod when the all-thread adapter is selected (sold separately).

Pan angle adjustments are achieved where the MultiMount and the vertical tube (pipe) connect. Down tilt adjustments are achieved at the mount’s two side clutch lock points.

This mount design lends itself ideally for down fill and spot fill applications in commercial and retail locations, theme parks, churches, schools, auditoriums and theatrical applications.

SPECIFICATIONS:

Material:	Structural Steel Alloy
Finish:	Powder Coat
Tilt Rotation:	180° max
Pan Rotation:	360° max
Color:	Black
Working Load Limit:	60 lbs. (27.2 kg)
Design Factor:	10:1 ratio
Net Weight:	4 lbs (1.8 Kg)
Shipping Weight:	5 lbs/2.3 Kg each
Pack Count:	1/carton