Related Datasheets

One Way Array Datasheet
Steerables Tilt Cable Kit Datasheet
Steerables Tilt Cable Calculator Datasheet
Components Fasteners Datasheet

 

 

Share |

Steerables

pdfView/Print PDFQUICK ADJUST PULLBACK SYSTEM



 

Adjustable Tilt Cable Kit

Steerables® Tilt Cable Kits are a general purpose, time saving and complete loudspeaker suspension and aiming solution. This versatile aircraft cable and pulley design allows installers to secure loudspeakers from an overhead grid structure or other suspension device, then quickly and precisely tilt them into position using the adjustable pull back feature (see Wall and ceiling Steerables®, GridLink™ data sheets).

The Steerables® Tilt Cable Kit provides a simple method of suspending and aiming loudspeakers, offering unprecedented ease of installation and aiming. Loudspeakers and other objects can be suspended to the top of the cabinet to achieve just slight down tilt angles or be suspended from the back of the cabinet to achieve a steeper down tilt angle (See illustrations below).

The clutch lock and pulley mechanisms are at the center of this design which provides the pull back cable with an infinite range of locking positions (tilt angles). Two fixed cables provide all of the necessary structural support while the pull back cable sets the tilt angle.

Standard and custom length fixed cables are offered for a wide variety of applications and they come equipped with all the necessary components for the installation. Choose from the following standard off-the-shelf kits listed below:

Standard Features:

  • Infinite tilt and locking adjustment
  • Available in black or silver finish
  • Standard and custom assemblies
  • Close factory cable length tolerances

SPECIFICATIONS:

Materials: See “Package Contents”
Color: Black or Silver
Design factor: 10:1 ratio*
Pack count: 1 set/package

 
     

STANDARD TILT CABLE KIT MODELS:

Part #: Fixed cable length
TCK-008 8.25” Fixed cable kit
TCK-010 10” Fixed cable kit
TCK-014 14” Fixed cable kit
TCK-018 18” Fixed cable kit
TCK-022 22” Fixed cable kit

To select the proper length tilt cable kit yourself, use the pattern maker and cable kit selector templates found on our website address listed below.

PACKAGE CONTENTS & WORKING LOAD:

Qty. Description WLL (lbs/kg)
2 pcs. 3/16” dia. Fixed cable 420/191
1 pc. 1/8” dia. Pull back cable 200/91
5 pcs. Anchor shackles 600/272
1 pc. Clutch lock assembly 220/100*
1 pc. Pulley assembly 210/95
5 pcs. Cable tie wrap N/A

* Clutch lock design factor = 5:1
** 4-Point suspension requires additional pair of fixed length cables
WLL = Working Load Limit